Wednesday, September 18, 2013

One Stitch at a Time


My youngest daughter sent me a photo from etsy a few weeks ago showing knee socks that rise above the top of the boot, embroidered with a 3-letter monogram -- $20 if you order them made for you. This was the perfect opportunity to use the lovely box of embroidery thread I found at a garage sale last year, even though I had to put a little WD40 on my rusty hand-embroidery skills.



The socks I found at Target for $2.50 a pair. I did purchase a roll of Sulky Water Soluble Stabilizer (with a 40% off coupon at Joann's) that I'll be able to use with my embroidery machine as well. I had the embroidery thread, needle and hoop on my shelves.


The first thing I did was spend a little time on the laptop looking at typestyles to see which font would look good for her monogram. With a 3-letter monogram, they go in this order: small first initial, large last initial, small middle initial. I settled on Snell Roundhand because it's a little fancy but not too much for hand stitching.


I printed this out on plain white paper to get the correct size, cut a small piece of water soluble stabilizer, laid it over the paper and traced the monogram onto the stabilizer with a Sharpie. (Used green ink so it would stand out from the black thread and make it easier to see my stitches.) I laid the stabilizer over the sock, figuring out where I wanted it to land (just under the heavy cuff) and hooped it. I used straight pins to help pin the rest of the cuff out of the way so I didn't accidentally stitch the top of the sock together.


I used black embroidery thread, a back stitch for all letters and went over the middle of the C again with a chain stitch ...


One thing to remember when doing a pair of anything: be sure to put your stitching on the correct side, i.e., to the outside of each sock.

It was fun to wash the water soluble stabilizer out of each sock and see it magically disappear. I ended up doing it twice because after they air dried the first time, I could still feel a little gluey stiffness that was left over. Rinsed them in the kitchen sink with a little warm tap water and a dab of hand soap.

We were finally able to celebrate Heidi's birthday with her belatedly last night and I think she liked her personalized knee socks. Hopefully, it will be chilly enough for her to wear them soon with her cute boots!


On an ooey gooey delicious dessert note, I made the Gluten Free version of Caramel Apple Butterfinger Bars by Confessions of a Cookbook Queen as a substitute birthday cake. A little heaven on earth that includes fresh Granny Smith apples, oatmeal, Butterfinger candy bars and Caramel ice cream topping. I didn't say it was calorie free, just gluten free, using GF Bisquick and Red Mill GF Oatmeal ...


Warmed up with a scoop of French Vanilla melting into all that caramel-y goodness ... just yum!


So many projects, never enough time!

Thursday, September 12, 2013

The diet is working or Halloween, here we come


Excuse me, my quirky side is showing. Believe it or not, this is another destashing project. I found this bag full of unfinished wood skeletons, ghosts and Halloween ribbon on my craft room shelf that I think I bought around 2004. I had this idea way back then to put our photos on the painted wood pieces and use them for Halloween decorations on our double front doors.

Our ghost dogs ~ Louie and Milesyoulittlebastard ~ are being walked {floated?} by the Granddaughter. Cracks me up!


Everything was purchased at Michael's Craft Store. The skeletons are called Small Mr. Bones and were $2.99 each; the ghosts were $.49 each. I used a 4-yard spool of the orange and black gingham checked ribbon ($2.99) and part of the 3-yard spool of pumpkin ribbon ($1.99). The 1/4" dowel that we are suspended from was in the garage and Hubby cut two 12" lengths for me that I covered in ribbon. Used white acrylic paint, super glue gel and hot glue.


The photos are printed on regular white paper. I did one run to gauge size, had to enlarge them all and used the fine print setting on the second go round. I opened the photos in iPages on my Macbook, used the masking tool to draw a circle around our heads, then enlarged, printed and cut out. I printed the Granddaughter's photo in full so I could leave her hair long in front.


I know you could laminate the photos, but I decided to just use clear shipping tape that I had on hand. Taped strips over the back first, carefully flipped right side up and taped over the front. Then I cut out each photo leaving about a 1/16" edge of tape.




In the meantime, the Granddaughter was painting, which obviously required sustenance in the form of goldfish and Dr. Pepper ...



Ribbons were glued on the dog/ghosts to represent collars ...


Loops of ribbon were glued on the backs to hook them over the dowel for hanging ...


The skeletons came with wire hangers so I just looped and glued ribbons through the wires ...


And now we're just hanging around! Holding hands ... so romantic!


Actually, it's still too soon for these to go up but I wanted to share the idea early just in case anyone else had any cute skeletons in the family closet ...


Happy Halloweenies!

So many projects, never enough time ...

Saturday, September 7, 2013

BBQin' in Style

Has your Hubby ever said something that he thinks is hilariously funny and when you give him the that's-not-funny blank stare, he gets exasperated and announces, "I need a better audience," or is that just me? *sigh*


Humor aside, my Hubby is the BBQ king. He has the slow cooking of juicy burgers, steaks and chicken down to a fine science. We also have a nephew who is a supreme BBQer and I wanted to send him something handmade for his last birthday so I dove into my bag of Hubby's nice-but-discarded shirts, added some quilting cotton and made him a BBQ apron.

I used the basic instructions from the Purl Bee's Adjustable Unisex Apron, then made adjustments to suit my shirt and add the lining.

The shirt is 100% cotton, soft and a little crinkly ...


Cut off the sleeves at the inset line ...


Sew the button placket closed down the front of the shirt ...


Cut the shirt front off in a straight line underneath the collar -- this will be the front of the apron ...


Lay the shirt piece on the lining fabric -- cut around the top and sides even with the shirt (no seam allowance needed) ...


Cut around the finished hem of the shirt with approximately 1" extra to create a hem on the lining ...


Press the lining hemline under twice to the wrong side of the fabric to match the shirt hemline as closely as possible -- this was a little wonky because of the curved hem on the shirt -- then stitch the lining hem down ...


With right sides of the shirt and lining together, sew around the sides and top (I used the serger for this), leaving the bottom (hem) open for turning. Then turn right side out and press ...


Fold each upper side of the shirt toward the lining, press and stitch to make a casing large enough for your apron strings. I did a double line of stitching here ...


I used strips of fabric cut from the back of the shirt to make the apron strings ...


Thread the strings through each side of the apron casings, making sure not to twist. The strings/neck strap are adjustable, depending on whether you like your apron to fit higher or lower. The front ...


The back ...


I personalized his apron by embroidering our nephew's name on a piece of the shirt fabric, then stitched it onto the pocket flap. Even though the shirt front placket has been stitched closed, the pockets are functional ...


Happy birthday, happy BBQ, happy sewing!

So many projects, never enough time ...

Sunday, September 1, 2013

Charm Crossing Quilt

Charm Crossing ... doesn't that sound like a lovely, cozy place to visit? Oh, believe me, it is!


I purchased two charm packs of Etchings by 3 Sisters for Moda, went on the search for a quilt pattern and fell in love with Charm Crossing by Tammie at craftytammie.com. Her Charm Crossing quilt was featured at Moda Bake Shop, which is where I first saw it.

This is only the second pieced quilt I've made, the first being a baby quilt for Princess Melody last year. The Etchings fabrics feature reds, creams, grays and blues. Finished size of my quilt is 63" by 77".

Here is my Charm Crossing journey in pictures. The 84 5" charm squares ...


A stack of quarter square triangles ...


Sorting them by color for layout ...



Working the design wall ...



The flimsy with borders ...


Pin basted ...


Quilting ...


Binding cut ...


Pressed and rolled ...


Attaching the binding ...



Finished front ...


and back ...


Completed today. It's been on the shelf for a while, just needing the binding. Took a few pictures outside and immediately put it into the washing machine with three Color Catchers (the possibility of the reds bleeding really made me nervous). Luckily, it came out perfect ... all soft and crinkly and I just love it. Not sure yet if it's going in the family room or on our bed, but I'm definitely keeping this one for myself. I'm planning to visit Charm Crossing a lot once the weather cools off.

So many projects, never enough time ...